Inverter SOFAR HYD20KTL hybrid three-phase Wifi&DC SWITCH (1) (1)

• 4 MPPT inputs, more flexible
  configuration
• AFP mode, better grid power quality
• Full digital control with higher accuracy
• Various modes of operation and fast amplification
• Multiple parallel circuits, More flexible system solutions
• Stand-alone output can be connected to an unbalanced load,
  Separate three-phase output is supported

Battery parameters:

Battery type - Lithium-ion
Battery voltage range - 200V-750V
Nominal charge/discharge current - 2*25A
Charging strategy -. by BMS
Maximum charge/discharge power - 20000W
Maximum charge/discharge power - 25000W<10min / 30000W<1min
DC Connector /Quality -. MC PV connector/2

PV input:

Recommended PV input power - 26600W
Maximum input voltage - 1000V
Start-up voltage -. 180V
MPT voltage range - 160V-960V
Rating voltage - 600V
Full-load voltage range - 500V-850V
Maximum input current - 25A/25A
Maximum short-circuit current - 32.5A/32.5A
Number of MPPTs / Number of chains of each MPPT -. 2/2+2

Output when off-grid:

Rated output voltage - 230V/400V (+-10%)
THD at full load - 3%
Rated output current - 3*29A
Maximum output current - 3*43.5A<1min
Output frequency - 50/60HZ
Primary output power - 20000W
Parallel connection -. Yes
Single output - Yes

Output on grid:

Rated output power -20000W
Maximum output power -22000VA
Rated output voltage - 230/400V; (184-275V) [According to local standard
Output frequency - 50Hz/60Hz
THD for full load - <3%
Grid type - 3/N/PE

Capacity:

Maximum capacity - 98.1%
European capacity - 97.6%
MPPT capacity - 99.9%

Protection:

Pre-islanding inputs - Yes
Output overcurrent - Yes
Output overvoltage - Yes
Pre-islanding - Yes
RCMU - Yes
Insulation resistance monitoring - Yes
Surge Protection - III

General Data:

Permissible relative humidity range - 0~100%
Weight - 35kg
Air temperature range - -25oC~+60oC
Noise - ≤45dB(A)
Maximum operating altitude - 2000 m
Cooling - fan
Protection rating - IP65
Dimensions - 560*570*230 mm
Warranty -. 5 years or longer

Functions:

DC terminal - MC4
Display - LCD graphic
Monitoring - RS485/WIFI/GPRS/Ethernet
Battery communication port - CAN
Meter communication - CAN
Parallel connection communication -. CAN+Sync+Fault Diagnostics
Digital Input - 6-digit inputs (5V TTL)

Standard:

EMC - EN 61000-6-2, EN 61000-6-3, EN 61000-3-2, EN 61000-3-3, EN 61000-3-11, EN 61000-3-12
Safety standards - IEC62109-1/2, IEC62040-1, IEC62116, IEC61727, IEC-61683, IEC60068(1,2,14,30)
Network Standards - AS/NZS 4777, VDE V 0124-100, V 0126-1-1, VDE-AR-N 4105, CEI 0-21, EN50438/EN50549, G83/G59/G98/G99, UTE C15-712-1, UNE 206 007-1